As an Amazon Influencer, we earn from qualifying purchases you might make if you click any of the links or buttons on this page.
Last updated: September 18, 2026
The Ryzen 7 5700X3D and Ryzen 7 5800X3D are easy CPUs to overspend on cooling.
Both are Zen 3, 8-core, 16-thread AM4 processors with 96MB of L3 cache and AMD’s 3D V-Cache technology.
Both also carry a 105W default TDP and a 90°C maximum operating temperature.
AMD’s official specifications confirm those numbers for the Ryzen 7 5700X3D and Ryzen 7 5800X3D .
But that does not mean you need a giant AIO.
The unusual part of these processors is the 3D-stacked cache sitting above the compute die.
That additional silicon makes heat transfer through the package less efficient. So an X3D processor can report a relatively high core temperature without actually dumping an enormous amount of heat into the cooler.
That changes how you should shop.
Once you have a competent tower cooler, spending dramatically more can still lower temperatures or noise, but it usually does not unlock meaningful additional gaming performance.
The rule for both AM4 X3D chips
Buy the dual tower unless your case physically cannot take it.
Check fit first, then buy enough cooling—not the largest cooler your budget allows.
Before ordering, check the cooler and case together with the CPU Cooler Compatibility Calculator .
Best coolers for Ryzen 7 5700X3D & 5800X3D
Thermalright Peerless Assassin 120 SE V2
The default answer for a normal mid-tower: serious dual-tower cooling without premium-cooler pricing.
- 155mm heatsink height
- Six 6mm heatpipes
- Dual 120mm PWM fans
- AM4 mounting support
- Main catch: RAM and case clearance
Thermalright Assassin X 120 Refined SE
The sensible cheap upgrade for an older AM4 system when you do not want a large dual tower.
- 148mm height
- Four 6mm heatpipes
- Single 120mm PWM fan
- AM4 mounting
- Main catch: less acoustic and thermal headroom
Thermalright AXP120-X67
The SFF option when no tower fits but your case still allows a 67mm-class top-down cooler.
- 67mm nominal total height
- Six heatpipes
- 120 × 15mm slim fan
- Top-down motherboard airflow
- Main catch: footprint and side-panel clearance
ARCTIC Liquid Freezer III Pro 240
The layout choice when your case wants a radiator, you want the RAM/socket area open, or liquid cooling simply fits the build better.
- 38mm-thick 240mm radiator
- Offset AMD mounting
- Integrated VRM fan
- Six-year warranty
- Main catch: at least 63mm installation clearance
5700X3D & 5800X3D cooler comparison
Swipe → to see the full table
| Cooler | Type | Size | Heatpipes / radiator | Best use | Main thing to check |
|---|---|---|---|---|---|
| Peerless Assassin 120 SE V2 | Dual-tower air | 155mm heatsink height | 6 heatpipes | Best for most builds | RAM + effective case height |
| Assassin X 120 Refined SE | Single-tower air | 148mm | 4 heatpipes | Strict budget / older case | Less noise headroom under sustained load |
| AXP120-X67 | Low-profile downdraft | 67mm nominal total | 6 heatpipes | Mini-ITX / SFF | RAM, VRM, GPU and side-panel clearance |
| Liquid Freezer III Pro 240 | 240mm AIO | 277 × 120 × 38mm radiator | 240mm liquid loop | Radiator-based layouts | 63mm installation stack + M.2 clearance |
Do the 5700X3D and 5800X3D need different coolers?
Not really.
The 5800X3D runs at higher clock speeds, but the two processors belong in essentially the same cooler class.
Both are:
- 8-core / 16-thread Zen 3 processors,
- equipped with 96MB L3 cache,
- rated at 105W TDP,
- limited to a 90°C maximum operating temperature,
- and built around AMD’s first-generation desktop 3D V-Cache implementation.
The 5700X3D is not a 65W chip
Its lower clock speeds sometimes create the impression that it can be treated like a Ryzen 5 5600 or Ryzen 7 5700X from a cooling perspective.
That is misleading.
In Tom’s Hardware’s power testing , the Ryzen 7 5700X3D reached approximately 117W peak power.
Tom’s found the higher-clocked 5800X3D only a few watts above it during most workloads.
So if you are replacing something like an old Ryzen 5 3600 or 3700X, do not assume the small Wraith cooler you already own is the ideal long-term solution.
Why X3D processors can look hot without using huge power
This is the most important concept in the entire article.
Tom’s Hardware compared the Ryzen 7 5800X3D with the regular Ryzen 7 5800X under heavy threaded workloads.
The ordinary 5800X consumed up to roughly 145W.
The 5800X3D peaked closer to 120W.
Yet both reached approximately 80°C.
The X3D processor was reaching the same temperature while consuming about 25W less power.
Tom’s attributed the behavior to the 3D-stacked design and silicon structure between the hot compute cores and the integrated heat spreader, which reduces the efficiency of heat transfer through the package.
Temperature is not the same thing as heat output
A 5800X3D sitting at 80°C does not automatically mean your cooler is handling the same heat load as a 200W processor at 80°C.
The reported core temperature tells you how hot the silicon is. It does not tell you how many watts the cooler is dissipating.
Prime95 makes the limitation even clearer
In Tom’s deliberately brutal Prime95 test, both the 5800X and 5800X3D eventually reached the 90°C limit.
But the 5800X3D reached that thermal ceiling while consuming much less power.
That is strong evidence that heat transfer through the X3D package itself is part of the limitation.
A larger cooler can still improve temperatures.
What it cannot do is remove the thermal resistance inside the processor package.
1. Thermalright Peerless Assassin 120 SE V2 — best overall
If your case fits this cooler, this is the option I would buy for either CPU.
The Peerless Assassin 120 SE V2 is a conventional large dual-tower design with six heatpipes and two 120mm fans.
The V2 Amazon specification lists:
- 155mm cooler height,
- six heatpipes,
- two 120 × 28mm PWM fans,
- up to 1850RPM,
- and AM4 mounting support.
PC Gamer’s 120W test is a useful capacity check
PC Gamer tested this exact V2 model in January 2026.
With its Intel test processor limited to 120W, the Peerless Assassin reached:
- 72°C maximum,
- 51°C average,
- during a 10-minute Cinebench R23 multi-thread run.
That was a completely different CPU and socket, so those temperatures are not a prediction of your 5700X3D or 5800X3D temperatures.
They do demonstrate that the cooler has ample capacity for a workload in roughly the same power band.
The weakness is acoustics at high fan speed
PC Gamer found the Peerless Assassin a little louder than several competing coolers when pushed hard.
That does not mean you should choose a smaller cooler.
It means you should use the heatsink’s thermal mass properly.
Use a gradual fan curve
X3D CPUs can show short temperature spikes.
There is little value in making both fans instantly jump to maximum RPM every time one occurs.
Use a slower fan ramp, allow the heatsink to absorb short spikes, and reserve high fan speeds for sustained temperature.
155mm does not always mean 155mm installed
This is the main compatibility trap.
The front fan overlaps the memory area.
If your DDR4 modules are tall, you may have to slide the fan upward.
That raises the effective total height above the cooler’s listed 155mm.
A case with exactly 155–157mm of official clearance therefore deserves careful measurement.
Check the complete combination using the CPU Cooler Compatibility Calculator .
2. Thermalright Assassin X 120 Refined SE — best budget upgrade
Not every AM4 upgrade needs another $40–$100 added to the build.
If you are dropping a 5700X3D or 5800X3D into a four- or five-year-old system, the Assassin X 120 Refined SE is the budget option I would check first.
Thermalright specifies it at 120 × 46 × 148mm, with four 6mm heatpipes, one 120mm PWM fan, and AM4/AM5 mounting support .
Why the 148mm height matters
Plenty of older budget cases were never designed for a 160mm-class flagship tower.
Eight millimeters of extra clearance compared with a 155–156mm dual tower can therefore be the difference between:
- a cooler that fits normally,
- and a side panel that does not close.
Tom’s testing shows surprising capacity for a cheap single tower
In Tom’s Hardware’s loaded CPU + GPU thermal test , the Assassin X 120 R SE reached about 70°C, only 4°C behind the original Noctua NH-D15.
At a 120W CPU load, Tom’s measured approximately 38.9dBA.
Again, this was an Intel test platform.
Use those results to judge the cooler’s capacity and noise behavior, not to predict an exact X3D temperature.
What do you give up versus Peerless Assassin?
- less fin area,
- two fewer heatpipes,
- one fan instead of two,
- less low-RPM cooling headroom,
- and more reliance on higher fan speed during sustained load.
For gaming, that can still be completely acceptable.
Budget doesn’t mean “reuse anything”
The 5700X3D is still officially a 105W CPU, and Tom’s measured about 117W peak.
I would not plan a new 5700X3D or 5800X3D upgrade around a tiny Wraith cooler simply because an older Ryzen CPU happened to ship with one.
3. Thermalright AXP120-X67 — best low-profile cooler
When a tower genuinely will not fit, the AXP120-X67 is the low-profile option I would reach for first.
Thermalright’s official specification lists:
- a 52mm heatsink,
- a 15mm-thick 120mm fan,
- six 6mm heatpipes,
- a 123.5 × 120mm heatsink footprint,
- and direct AM4 support.
That gives you a nominal total height of 67mm.
Why a 67mm cooler is so different from a 37mm one
Low-profile coolers are not all interchangeable.
The AXP120-X67 still gives you:
- a broad 120mm fan,
- six heatpipes,
- substantial fin area,
- and airflow across the motherboard around the socket.
That is a very different cooling solution from an ultra-short heatsink built purely to fit below a severe height limit.
67mm is only the first measurement
The cooler also occupies roughly 123.5 × 120mm around the socket.
Depending on orientation, check:
- RAM heatspreaders,
- VRM heatsinks,
- motherboard I/O covers,
- the GPU backplate or riser,
- and nearby M.2 heatsinks.
Leave some space above the fan
A top-down fan positioned directly against a perforated side panel can generate more turbulence and noise.
A case saying “67mm CPU cooler support” does not necessarily mean 67mm is the acoustically ideal choice.
A few millimeters of breathing room can matter.
Reset your temperature expectations in SFF
Both CPUs are rated up to 90°C.
A compact build using a low-profile cooler will naturally operate closer to the thermal ceiling than a large airflow-focused tower.
The goal is stable performance and acceptable noise inside the smaller enclosure, not matching an open-bench dual-tower temperature.
4. ARCTIC Liquid Freezer III Pro 240 — best 240mm AIO
The Liquid Freezer III Pro 240 is not here because the 5700X3D or 5800X3D needs liquid cooling to play games properly.
It is here because some PC layouts are simply better with a radiator.
Good reasons to buy it
- Your case was designed around top-mounted or front-mounted radiator cooling.
- A 155mm dual tower physically will not fit.
- You want the RAM and socket area unobstructed.
- You prefer the look of an AIO.
- You want extra radiator area so the fans can remain slower during sustained load.
ARCTIC’s design is especially interesting for AMD
The Liquid Freezer III Pro 240 uses offset AMD mounting instead of placing the cooling contact strictly around the geometric center of the socket.
It also includes:
- a pump operating from 800–2800RPM,
- an integrated VRM fan,
- two P12 Pro radiator fans,
- MX-6 thermal compound,
- and a six-year warranty.
The radiator is much thicker than many 240mm AIOs
ARCTIC’s radiator is 38mm thick.
The company explicitly states that the Liquid Freezer III Pro requires at least 63mm of installation clearance.
That figure is much more useful than simply asking:
“Does my case support a 240mm radiator?”
You also need to check:
- radiator + fan stack thickness,
- motherboard VRM clearance,
- RAM clearance,
- top M.2 heatsinks,
- tube routing,
- and GPU clearance if front mounted.
ARCTIC specifically warns that oversized M.2_1 SSD heatsinks can interfere on some motherboards.
You do not need 3000RPM fans for normal X3D gaming
The P12 Pro fans can spin extremely fast.
That capability is useful thermal headroom, not a recommendation to run them at full speed.
Build a gradual PWM curve around sustained CPU temperature instead.
If you front-mount the radiator, check whether the reduced case depth still leaves enough room for your GPU with the Case & GPU Fit Calculator .
Do you need a 280mm or 360mm AIO?
No—not simply because the processor has “X3D” in its name.
A larger radiator can:
- reduce fan RPM for the same coolant temperature,
- handle sustained CPU load more quietly,
- fit a particular case layout better,
- or be reused later with a hotter processor.
Those are legitimate reasons.
What it generally will not do is transform gaming performance once the CPU is already being cooled adequately.
A 360mm AIO is an optional luxury here
Buy one if your case, noise target, future CPU plans or aesthetics give you a reason.
Do not buy one because you think a 5800X3D needs a 360mm radiator to reach its normal gaming performance.
Special note: Ryzen 7 5800X3D 10th Anniversary Edition
AMD brought back a special Ryzen 7 5800X3D 10th Anniversary Edition in 2026.
That edition was bundled with a Carbice Ice Pad thermal interface.
That does not mean every ordinary 5800X3D includes the pad.
If your special-edition CPU includes the Carbice pad
Follow the supplied Carbice/AMD installation instructions carefully.
The thermal pad is a replacement thermal interface. Do not apply normal thermal paste on top of the pad.
If you choose conventional thermal paste instead, remove the pad and prepare the CPU/cooler surfaces normally.
I would also avoid treating the pad as guaranteed to outperform every premium paste in every build.
Its major appeal is a durable, pre-sized, non-pump-out thermal interface rather than a promise of one universal temperature result.
What about Curve Optimizer?
A negative Curve Optimizer setting can reduce the voltage required for a given clock frequency on a stable individual CPU, which can reduce power and temperature.
But this topic needs several caveats on AM4 X3D.
First: update the BIOS
Motherboard support for the 5700X3D and 5800X3D evolved over time.
Before tuning anything:
- check the board manufacturer’s CPU-support page,
- install the appropriate stable BIOS,
- confirm the CPU behaves properly at stock settings,
- and only then inspect the available PBO/Curve Optimizer options.
You can verify the CPU/board combination with the Motherboard Compatibility Tool .
Not every BIOS exposes the same X3D controls
Some AM4 boards expose Curve Optimizer directly for these chips. Others expose vendor-specific alternatives, and some older firmware revisions provide very little control.
Do not assume an option shown in someone else’s BIOS exists on yours.
Do not copy a universal -30 setting
Individual CPUs vary.
A negative value that passes one person’s games may produce:
- WHEA errors,
- idle crashes,
- random reboots,
- or instability under light single-core workloads
on another CPU.
If you tune, start conservatively and stress-test the processor properly.
Curve Optimizer is optional
You do not need an undervolt simply to make either processor usable.
A correctly mounted cooler, reasonable case airflow and a sensible fan curve should work at stock settings first.
RAM clearance matters more than cooler marketing
Large dual towers can physically cover the DIMM area.
With the Peerless Assassin, the front fan is usually the critical component.
If tall memory forces you to raise that fan, the actual installed height rises as well.
For example:
A nominally 155mm cooler with its front fan shifted upward by 7mm may effectively need roughly 162mm of side-panel clearance.
That is why the case specification and RAM height need to be checked together.
Case airflow still matters
The best CPU cooler in the world cannot perform properly if it is being fed hot stagnant air.
This matters especially in an upgraded AM4 gaming PC, because a modern GPU may dump far more heat into the case than either X3D CPU does.
Check:
- front intake restriction,
- dust filters,
- intake-fan speed,
- rear/top exhaust,
- GPU exhaust behavior,
- and cable obstruction.
A new cooler cannot fix terrible case ventilation
If the entire interior of the case is hot, the cooler begins with hotter intake air.
Improving case airflow may therefore produce a larger practical improvement than replacing one already-competent tower with a much more expensive one.
How to choose in 30 seconds
Peerless Assassin 120 SE V2
The default. Six heatpipes, dual tower, two fans and more than enough capacity for either X3D chip.
Assassin X 120 Refined SE
Use the inexpensive 148mm single tower when you want a simple AM4 upgrade without spending much on cooling.
AXP120-X67
Use the largest practical low-profile cooler rather than shrinking further than the case requires.
Liquid Freezer III Pro 240
Use the AIO when radiator mounting, socket access, RAM clearance or aesthetics make liquid cooling preferable.
Watch: Best CPU Coolers for Ryzen 7 5700X3D & 5800X3D
The BC Zone video below follows the same principle as this guide: fit first, then buy enough thermal capacity.
A larger and more expensive cooler can lower temperatures or noise, but these X3D processors do not reward unnecessary cooler spending with proportional gaming performance.
Eight mistakes to avoid
- Buying the largest cooler you can afford. Once a competent cooler is already preventing meaningful thermal limitation, extra radiator or heatsink size does not automatically create gaming FPS.
- Assuming the 5700X3D is a low-power chip because it is slower than the 5800X3D. It is still officially a 105W processor and has been measured around 117W peak.
- Panicking because an X3D CPU reports 80°C. The stacked package is more difficult to transfer heat through than a conventional Zen 3 package.
- Using the listed cooler height without checking RAM. Raising a front fan can increase effective installed height.
- Buying a 37mm low-profile cooler when the case can fit 67mm. Use the largest practical heatsink the enclosure allows.
- Assuming every 240mm AIO fits every 240mm radiator mount. The Liquid Freezer III Pro’s thick radiator requires at least 63mm of installation clearance.
- Copying somebody else’s Curve Optimizer values. Stability varies by individual CPU and motherboard firmware.
- Adding thermal paste on top of a Carbice Ice Pad. The special-edition pad is itself the thermal interface. Use one TIM system, not both simultaneously.
Final verdict
What I would buy
Almost everyone: Thermalright Peerless Assassin 120 SE V2.
Strict budget: Thermalright Assassin X 120 Refined SE.
67mm SFF build: Thermalright AXP120-X67.
Case wants a radiator / you want liquid: ARCTIC Liquid Freezer III Pro 240.
The best cooler for the Ryzen 7 5700X3D or 5800X3D is not the model with the largest radiator or highest advertised TDP rating.
It is the least expensive, quiet-enough cooler that:
- fits the case,
- clears your memory and motherboard,
- keeps the CPU inside its normal operating range,
- and does so without annoying fan noise.
For most systems, that is a good dual-tower air cooler.
Use the money you did not spend on unnecessary cooling for the component that actually changes game performance.
More Best Motherboard Zone AM4 guides
Check CPU cooler compatibility
Verify height, socket support and other fit concerns before ordering.
More affordable air coolers
Compare other strong budget tower coolers before paying premium prices.
Upgrading the 5700X3D GPU?
See which graphics cards make sense for this final-generation AM4 gaming CPU.
How far can AM4 still go?
Compare sensible GPU tiers across older Ryzen, Ryzen 5000 and X3D systems.
Building around a 5800X3D?
See complete build combinations for AMD’s original desktop X3D gaming CPU.
Choosing a 5700X3D motherboard?
Compare B550 and X570 options and the BIOS considerations that matter.
Check motherboard compatibility
Confirm that your current AM4 board supports the CPU and identify the BIOS requirement.
Thinking beyond AM4?
Compare the performance gain before replacing your current X3D processor and platform.
Front-mounting the AIO?
Check whether the radiator and fans leave enough length for the graphics card.
Ryzen 7 5700X3D & 5800X3D cooler FAQ
What is the best CPU cooler for Ryzen 7 5700X3D?
For most standard cases, I recommend the Thermalright Peerless Assassin 120 SE V2. It provides substantially more than enough cooling capacity for normal 5700X3D gaming without requiring an expensive AIO.
What is the best CPU cooler for Ryzen 7 5800X3D?
The same Peerless Assassin 120 SE V2 is my default recommendation. The 5800X3D can report relatively high core temperatures because of the 3D-stacked package, but that does not mean it requires a giant liquid cooler.
Do the 5700X3D and 5800X3D need different coolers?
No. They share the same 105W TDP, 90°C maximum operating temperature and broadly similar thermal requirements. The 5800X3D clocks higher, but both belong in the same general cooler class.
Is the Peerless Assassin 120 SE V2 enough for a 5800X3D?
Yes. It is a substantial six-heatpipe dual-tower cooler. PC Gamer also demonstrated strong cooling capacity at a 120W sustained CPU load, although that benchmark used a different Intel processor and should not be read as a direct 5800X3D temperature prediction.
Is the Peerless Assassin 120 SE V2 enough for a 5700X3D?
Yes. It provides more cooling capacity than most gaming-focused 5700X3D builds need. Case airflow and correct installation remain important.
Is the Assassin X 120 Refined SE enough for a 5700X3D?
For a budget gaming build with reasonable airflow, yes. It has less thermal and acoustic headroom than a dual tower, but independent testing shows substantial cooling capacity for such an inexpensive single-tower design.
Can I use the Assassin X 120 Refined SE with a 5800X3D?
Yes, particularly for gaming-focused use. If you frequently run long all-core workloads and prioritize low noise, I would prefer the Peerless Assassin instead.
Does the 5700X3D need an AIO?
No. A quality air cooler is completely appropriate. Choose an AIO because its layout, noise behavior or appearance works better for the build—not because liquid cooling is mandatory.
Does the 5800X3D need an AIO?
No. A competent dual-tower air cooler is enough for normal operation and gaming. An AIO can lower temperature or noise, but it is not required to unlock normal gaming performance.
Do I need a 360mm AIO for a 5800X3D?
No. A 360mm AIO is optional and makes the most sense for acoustics, case layout, aesthetics or future cooler reuse.
Why does my 5800X3D run hot?
AMD’s 3D V-Cache package adds thermal resistance between the hot compute cores and the cooler. Independent testing shows the 5800X3D can therefore reach temperatures similar to a regular 5800X while consuming substantially less power.
Is 80°C safe for the 5800X3D?
AMD specifies a 90°C maximum operating temperature. An 80°C reading during a heavy workload is therefore below the official limit. Judge the workload, clock behavior, fan noise and sustained temperature together rather than the number in isolation.
Is 80°C safe for the 5700X3D?
Yes, it is below AMD’s specified 90°C maximum. If the CPU is constantly sitting near 90°C during ordinary gaming, however, check mounting, thermal interface, fan control and case airflow.
What is the best low-profile cooler for 5700X3D or 5800X3D?
If your case allows approximately 67mm, the Thermalright AXP120-X67 is my choice. Its six heatpipes and broad 120mm slim fan provide considerably more thermal capacity than ultra-short low-profile designs.
Will the AXP120-X67 fit every 67mm case?
Not necessarily. Its heatsink footprint is roughly 123.5 × 120mm, and a fan positioned directly against a side panel can also create turbulence. Check RAM, VRM heatsinks, GPU/riser clearance and space above the fan.
What is the best 240mm AIO for 5700X3D and 5800X3D?
I recommend the ARCTIC Liquid Freezer III Pro 240. It has a thick 38mm radiator, offset AMD mounting, an integrated VRM fan and a six-year warranty.
Will the Liquid Freezer III Pro 240 fit any 240mm case?
No. ARCTIC requires at least 63mm of installation clearance, and oversized M.2_1 heatsinks can interfere on some motherboards. A case merely listing “240mm radiator support” is not enough information.
Can tall RAM interfere with the Peerless Assassin?
Yes. The front fan can overlap tall DIMMs. Raising the fan usually solves the RAM conflict, but also increases the cooler’s effective total height.
Should I use Curve Optimizer on a 5700X3D?
Only if your motherboard BIOS exposes the feature and you want to tune it. A conservative negative curve can improve efficiency on some individual CPUs, but stability varies. Establish a stable stock baseline first.
Should I use Curve Optimizer on a 5800X3D?
The same caution applies. Available controls vary by motherboard and BIOS, and there is no universally stable negative Curve Optimizer value.
Does the 5800X3D 10th Anniversary Edition use thermal paste?
The 2026 10th Anniversary Edition bundle includes a Carbice Ice Pad thermal interface. If you use the supplied pad, follow its installation instructions and do not apply conventional thermal paste on top of it. Ordinary 5800X3D processors are not automatically supplied with this pad.
Will a better cooler increase FPS on the 5700X3D or 5800X3D?
Only when the existing cooling solution is actually causing a thermal performance limit. Once a competent cooler is already maintaining normal clocks, a much larger heatsink or radiator generally produces little or no meaningful gaming-performance gain.
Can I reuse my old Wraith cooler?
Physically, some older AM4 coolers may mount. That does not make them the cooler I would choose for a new 105W X3D upgrade. A modern inexpensive tower such as the Assassin X 120 Refined SE provides much more useful thermal and acoustic headroom.
Research and specification sources
- AMD — Ryzen 7 5700X3D Specifications
- AMD — Ryzen 7 5800X3D Specifications
- Tom’s Hardware — Ryzen 7 5700X3D Power Testing
- Tom’s Hardware — Ryzen 7 5800X3D Thermal and Boost Testing
- PC Gamer — Thermalright Peerless Assassin 120 SE V2 Review
- Thermalright — Peerless Assassin 120 SE V2
- Tom’s Hardware — Thermalright Assassin X 120 R SE Testing
- Thermalright — Assassin X 120 Refined SE Specifications
- Thermalright — AXP120-X67 Specifications
- ARCTIC — Liquid Freezer III Pro 240 Specifications and Compatibility
- Carbice — Ryzen 7 5800X3D 10th Anniversary Ice Pad Bundle
- MSI X870 Tomahawk vs B850 Tomahawk MAX: Which Should You Buy? - September 29, 2026
- RTX 5060 Ti 8GB vs 16GB: Which Should You Buy in 2026? - September 25, 2026
- Best CPUs for RX 9070 XT in 2026 - September 25, 2026